HDL-MDT0203.433
HDL-MDT04015.433
HDL-MDT0601.433
HDL-MDLED0605.432
HDL-MD0206.432
HDL-MD0403.432
HDL-MD0602.432
HDL-MCR01.40
SB-WL-B0120
SB-WL-B0210

Dimmers

Adding light adds life, beauty and ambience to a home. S-Bus controls the light intensity, colour and working channels, creating artistic and elegant shapes that emphasise beauty.

Dimmers are devices used to vary the brightness of a light. By decreasing or increasing the RMS voltage it is possible to vary the intensity of the light output and control the lighting.

2ch 3A Universal Dimmer: HDL-MDT0203.433

MOSFET dimmer supporting leading and trailing edge dimming. Four selectable dimming curves available, and the ability to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

4ch 1.5A Universal Dimmer: HDL-MDT04015.433

MOSFET dimmer supporting leading and trailing edge dimming. Four selectable dimming curves available, and the ability to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

6ch 1A Universal Dimmer: HDL-MDT0601.433

MOSFET dimmer supporting leading and trailing edge dimming. Four selectable dimming curves available, and the ability to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

6CH 5A LED Driver: HDL-MDLED0605.432

6channel 5A Intelligent LED Dimming Module; can be used to control the LED Light which has constant voltage. It has 6 output channels and each channel has a bypass button for manual control. Scene and sequence functions are available

2 channel 6A Dimmer: HDL-MD0206.432

2 channel 6A Dimmer, supports 240Vac and 110Vac power input. It has 2 output channels; each channel has a bypass button for manual control. There is a fuse protection for each channel so the dimmer will be protected in case of short circuit. LED indicator will show you which channel has short circuited

4 channel 3A Dimmer: HDL-MD0403.432

4 channel 3A Dimmer,supports 240Vac and 110Vac power input. It has 4 output channels; each channel has a bypass button for manual control. There is a fuse protection for each channel so the dimmer will be protected in case of short circuit. LED indicator will show you which channel has short circuited

6 channel 2A Dimmer: HDL-MD0602.432

6 channel 2A Dimmer,supports 240Vac and 110Vac power input. It has 6 output channels; each channel has a bypass button for manual control. There is a fuse protection for each channel so the dimmer will be protected in case of short circuit. LED indicator will show you which channel has short circuited

Constant Current Module: HDL-MCR01.40

TRIAC constant current load,to supply a minimum holding current for the TRIAC. The purpose is to clear up the dimming flickering when the Dimmer connects to a capacitance load such as LED and electric transformer

1 Channel 20A Power Amplifier: SB-WL-B0120

Wall Mounted, 1CH (20A) Booster Dimmer Power Amplifier (Line BOOSTER) 0-10VDC/0-220Vac input, 50-60Hz, heat sink technology. It has 2 control inputs; 0-10Vdc and 0-220Vac giving more flexibility to solve problems

2 Channel 10A Power Amplifier: SB-WL-B0210

Connect high load channel to be part of your BUS system as a cheap solution to complete a project. It can also be connected to any manual dimmer or other dimming system to boost the signal to 10Amp load for each channel.